THE OLD BOAT YARD, SANDWQICH MARINA, SANDWICH, KENT CT13 9LY
Your Cart is Empty
There was an error with PayPalClick here to try again
Thank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart
ITEMS FOR SALE
ITEMS FOR SALE
|Posted on March 9, 2013 at 2:49 PM||comments (122)|
2006 Evinrude E-Tec 250 HP 25 Inch Outboard Motor SPARES OR REPAIR
Bigger engines. Bigger lead. More displacement, more torque, more top-end than anything in the V-6 class.
Too much of a good thing? Not when you’re this good.
Enginetype V6 90° E-TEC DI
Displacement 200 cu in/3279 cc
Recommended fuel 87 Octane Emissions compliance CARB 3 Star, U.S EPA, European Union
Recommended Oil Evinrude/Johnson XD100™ OilPropshaft
HP 250 HP (187 kw) @ 5150 RPM Full Throttle RPM Range 4500-5800 tr/min
Alternator output 133 Amps Total Output/ 50 Amps Net Dedicated Fuel induction E-TEC DI w/ Stratified low RPM combustion mode
Lubrication Multi-point, targeted oiling
Bore x Stroke 3.854 x 2.858 in / 98 x 73 mm
|Posted on March 9, 2013 at 2:43 PM||comments (128)|
SMALL 8.5 ft GO CART LIKE SPEEDBOAT WITH 40 hp OUTBOARD
ENGINE KNOWN TO BE NISSAN. NO TILTS AND TRIM,
ENGINE IS PULL START AND COMES FULLY FUNCTIONAL WITH STEERING AND FOOT THROTTLE , ALSO HAS EMERGANCE RIST BAND CUT OUT ,
GOES VERY WELL INFACT GOES AWSOME .
FOR YOUNG OR OLDER CHILDREN BY THAT I MEAN ADULTS TOO HAHAH LOTS OF FUN TO BE HAD NO MATTER YOUR AGES.
VERY LIGHT AND EASY TO HANDLE ON BEACHES OR SLIP WAYS . GREAT TOY FOR EVERY ONE AND WONT TAKE MUCH ROOM IN YOUR GARAGE .
PICK UP IN PERSON ONLY
|Posted on March 9, 2013 at 2:35 PM||comments (198)|
Ready to take !!DRIVE COMES COMPLETE WITH
|Posted on March 9, 2013 at 12:38 PM||comments (198)|
|Posted on September 1, 2012 at 4:38 PM||comments (261)|
SECOND HAND GOOD RUNNING 6 CYLINDER TURBO DIESEL MARINE ENGINE
VERY TIDY CLEAN ENGINE JUST SERVICED AND PAINTED.
READY AND CONVERTED TO FIT THE VOLVO PENTA 270, 280, 290, DPE .STERNDRIVE .
COMES WITH BELL- HOUSING ALL ANCILLARIES AND WIRING HARNESS, THROUGH BOAT LOOM AND DASH PANEL
in-board diesel engine 100 - 200 hp (direct injection, turbocharged)
D150 (135 HP @ 3800 rpm)
The BMW D150W Marine Engine 100kW(136bhp).Particularly suitable for displacement boats and fast planing cruisers Through its compact dimensions and extremely
low weight:60 kg/132 lb less than most of its competitors.
FOR MORE INFO AND CONTACT DETAILS PLEASE CLICK ON THE PHOTO..
|Posted on June 22, 2012 at 9:59 AM||comments (98)|
This ski was last used last year 2011 when towards the end of the summer one of the rings let go and caused some minor damage.
She will need a full gasket kit, piston and rings and away you will go again.
She was working great fro years , very reliable and gave great fun for all. And not bad on fuel either.
The engine was removed for inspection then with winter approching and far to busy at work the poor ski sat waiting.
Cosmetics are taty from alot of use , but with a polish and new foam feet pads ,she will look fine.
The hull is sound no leaks and was always beached on sand.
The trailer works fine but could do with a winch and new wheel bearings. Nothing unusual there...
We paid £1500 for this ski just beggining of last year, so grab a bargin and have this lovelty cheap project ski and get the urg for the water cured.
The engine and bay is very clean with very very little oxidisation.
|Posted on January 31, 2012 at 5:07 AM||comments (13)|
This engine was fully-reconditioned this year everything was rebuilt renewed and repainted replaced as necessary.
You may notice (thanks sinbad1405) the Solex carbs have been replaced by the older Stromberg's. This allows for tighter fitting under the engine cover and in my opinion offer better response.
The engine is as good as new as can be seen in the picturesI had it done by a professional and specialist in marine engines
Check this link to see the engines final test run at the garage,http://s368.photobucket.com/albums/oo130/stevemagpie/Lady%20Jessica/?action=view¤t=PentaAQ130.mp4
Unfortunately the boat I was planning to put it in is going to remain an unfinished project.This means I am selling the Engine (as listed), and the Sterndrive 280 leg (not included) and the Trailer (not included) that the boat is sitting on, as I no longer have the time or interest to finish the project.
(would consider an offer for the lot)
Collection only from Lydd Kent(Would consider delivering at a cost to you.)Cash on collection
|Posted on November 14, 2011 at 4:25 PM||comments (108)|
Completely stripped and rebuilt, removing & replacing any defective components or parts that have worn beyond manufacturers specifications. When we say "completely stripped" we mean everything including stripping fuel pump, distributor, alternator, carburetors, raw water pump, oil cooler, & exhaust manifold. You will find it difficult to find this quality of rebuild at such a keen price.
All exterior components/parts dipped to remove paint & rust, & then repainted . Rewired to the original Volvo wire colours & sizes (including the 11 pin plug, and an additional socket & connectors are also enclosed for convenience) Run and analysed on custom engine test stand.
Only the bell housing not included. All components to make up a complete engine are included in this auction.
Also complete system (i.e. including outdrive) available to order. Exchange welcome, rates are dependent on condition of your engine. Other Engines in stock & available to order. (i.e. AQ130, AQ171, AQ205) Based in New Romney Kent, UK Franchise of IVSS Marine (http://ivssmarine.wavepower.org.uk) LOCATION: NEW ROMNEY, KENT
PRICE: £2500 Any questions: 07890 659 931
|Posted on October 24, 2011 at 1:42 PM||comments (106)|
|Posted on October 24, 2011 at 12:49 PM||comments (105)|